C1 Electric Bicycle Conversion Kit - UK for Silver Rim Brake Bike 700C 32H Wheel - NO BOTTLE

More Views

    Specification

    Details

    C1 Electric Bicycle Conversion Kit - UK for Silver Rim Brake Bike 700C 32H Wheel - NO BOTTLE
    Additional Information

    Additional Information

    Free ShippingNo
    C1 Electric Bicycle Conversion Kit - UK for Silver Rim Brake Bike 700C 32H Wheel - NO BOTTLE

    From: £475.37

    To: £813.51

    Price as configured: £0.00

    Availability: In stock

    Cytronex C1 rim brake motor-Silver-32 hole-25kph / 15.5mph   £200.00
    Please choose option...
    Cytronex C1 Standard Charger (with AC mains cable)   £72.00Cytronex C1 Fast Charger (with AC mains cable)   £128.00No Charger - for customers who have a charger already   £0.00
    Please choose option...
    TUBE Nutrak 700x25-32c Prst   £7.49TUBE Nutrak 700x35-45c Prst   £7.49No inner tube - I will fit my own inner tube   £0.00
    Please choose option...
    Marathon Plus Reflective Tyre 700x28c   £41.45Marathon Plus Reflective Tyre 700x32c   £41.45Marathon Plus Reflective Tyre 700x35c   £41.45Marathon Plus Reflective Tyre 700x38c   £41.45No tyre – I will fit my own tyre   £0.00
    Please choose option...
    Cytronex C1 Fitting Charge   £155.00No fitting Charge – I am fitting my own kit   £0.00
    Cytronex C1 Bottle Cage   £135.00
    Cytronex C1 Boost Button   £0.00
    Cytronex C1 Sensor   £45.00
    Prolock nipples-Silver-2 x 14 mm   £0.33
    Cytronex C1 bottle box   £3.64
    Cytronex C1 Outer kit box   £5.00
    Wheel build for standard Cytronex Wheels   £46.00

    Tell us about your bike:

    Back
    * Compatibility

    Please confirm that you have checked your cycle is compatible with Cytronex C1 and that your cycle is safe to fit by clicking 'I Agree' below. If you haven't checked yet, you can find compatibility help HERE

    Comaptibility

    I confirm that:

    1. Motor Template shows motor is suitable for my bicycle
    2. Bottle Cage Template fits in space above the downtube of my bike
    3. At least one rear sprocket (i.e. rear wheel cog) on my bike is attracted by a magnet. (i.e. the sprocket is ferrous)
    4. I understand that I am responsible for safety checking the cycle to which I will fit the C1 kit, which should for example, not be fitted to cycles with corroded or damaged forks, low quality forks without adequate strength or forks that have been involved in an accident. Newer bikes should be made to the ISO 4210 standard.
    My bike has Lawyer Lips / Tabs - i.e. protrusions at the bottom of dropdouts or a lip around the dropouts. See motor Template.
    Next Step Back a step
    * Bottle Cage Position

    When you tried the Bottle Cage Template against your bike - please confirm whether the cage will fit in the recommended position (Position 1) or you need to use the alternative position (Position 2).

    * Carbon Frame
    Please note: this question is required because Carbon Frames require longer sensor cable, due to the enlarged bottom bracket shell.
    Additional Information
    Next Step Back a step
    * Gears
    * Suspension
    Next Step Back a step

    Please note bikes with rear suspension usually do not have enough space for the Cytronex C1 bottle, please be sure you have checked clearance carefully using the Bottle Cage Template?

    Cytronex C1 has not been tested yet in rough off road conditions such as downhill mountain biking. The use of a Cytronex C1 system in such conditions will void the Warranty.

    Cytronex C1 is a custom made bespoke product so we will produce cables to suit your bicycle.
    We recommend that you have your bicycle and a tape measure next to you as you add these measurements, and double check each dimension.

    Dimension 1

    Please measure from the centre of the rear axle to the centre of the pedal crank. For a tandem this means the centre of the front crank.

    Maximum number of characters: 7

    Dimension 2

    Please measure from the centre of the pedal crank to the centre of the top bottle cage bolt. For a tandem this means the centre of the front crank - the C1 bottle should be positioned in the front triangle.

    Maximum number of characters: 7

    Dimension 3

    With the front wheel pointing forwards in line with the bicycle frame - please measure from the centre of the top bottle cage bolt to the centre of the front axle.

    Maximum number of characters: 7

    Dimension 4 (Add only dimension 4 or 5)

    If you have a flat handlebar please measure from the centre of the top bottle cage bolt to the centre of the inside edge of the gear shift mount.

    Maximum number of characters: 7

    Dimension 5 (Add only dimension 4 or 5)

    If you have a drop handlebar please measure from the centre of the top bottle cage bolt to the centre of the inside edge of your handlebar tape.

    Maximum number of characters: 7

    Add Kit to Basket Back a step
    Back
    Enter Dimension CM cm
    Confirm dimension Close

    * Required Fields

    Price as configured: £0.00

    Once you have selected rim and charger the total price of your kit will be shown above “Select Rim”.

    When you click or tap the blue button below, you will be asked some questions about your bike and will need to take some simple dimensions. We recommend that you have your bike nearby and have a tape measure to hand. The dimensions allow us to cut the cables to neatly fit your bike.

    Tell us about your bike & buy
    We are sorry but this kit is currently out of stock
    Currently out of stock. Please contact us for availability details.