JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
Kit Price shown here will change as you choose the optional parts of your kit below
From £596.83
To £790.23
In stock
Please confirm that you have checked your cycle is compatible with Cytronex and that your cycle is safe to fit by clicking 'I Agree' below. If you haven't checked yet, you can find compatibility help HERE
When you tried the Bottle Holder Template against your bike - please confirm whether the cage will fit in the recommended position (Position 1) or you need to use the alternative position (Position 2).
Please note: this question is required because Carbon Frames require longer sensor cable, due to the enlarged bottom bracket shell.
Please note bikes with rear suspension usually do not have enough space for the Cytronex bottle, please be sure you have checked clearance carefully using the Bottle Cage Template?
Cytronex has not been tested yet in rough off road conditions such as downhill mountain biking. The use of a Cytronex system in such conditions will void the Warranty.
Cytronex is a custom made bespoke product so we will produce cables to suit your bicycle. We recommend that you have your bicycle and a tape measure next to you as you add these measurements, and double check each dimension.
Please measure from the centre of the rear axle to the centre of the pedal crank. For a tandem this means the centre of the front crank.
Maximum 7 characters
Please measure from the centre of the pedal crank to the centre of the top bottle cage bolt. For a tandem this means the centre of the front crank - the Cytronex bottle should be positioned in the front triangle.
With the front wheel pointing forwards in line with the bicycle frame - please measure from the centre of the top bottle cage bolt to the centre of the front axle.
If you have a flat handlebar please measure from the centre of the top bottle cage bolt to the centre of the inside edge of the gear shift mount.
If you have a drop handlebar please measure from the centre of the top bottle cage bolt to the centre of the inside edge of your handlebar tape.
If you need to check any details of your order please click “BACK” or just add the kit to your basket below
* Required Fields
Loading...
